find Best FC 26 settings If you have purchased or upgraded a gaming PC within the last five years, it’s not that difficult for a PC. From our buying guide you don’t need the best graphics card near you, the best graphics card near you to get great performance. The TestNVidiaRTX 4070 GPU can also generate fast frame rates during playback in 4K with Ultra Graphics Preset.
The requirements for the FC 26 system are very low, as would be expected if major engine changes were not implemented since last year’s installments. However, without upscaling techniques like NVIDIA DLSS or AMD FSR, some owners of older slow gaming PCs may need to drop some settings to run the FC 26 smoothly. Unfortunately, for those looking to play FC 26 on Steam Deck, you’ll have a much more difficult time.
Best EA Sports FC 26 Settings for PC
- Quality rendering:Ultra
- Stand-based hair: Above
- Grass quality: expensive
- Crowd quality: expensive
- Fabric quality: expensive
- Surrounding occlusion quality: expensive
- Motion blur: Above
- Frame Rate Limit: Unlimited
- vsync: Above
- Cutscene performance: Full frame rate
- Rendering Scale:100
- Dynamic resolution scaling: Off
Using the above settings on the RTX 4070 test rig (full specifications for the test section), we achieved an average frame rate of 153FP at 1,920 x 1,080 at 1,920 x 1,080 with a 1% low of 94fps. At 2,560 x 1,440, the average frame rate was 132FPS, a 1% lower value of 90FPS. Finally, in 4K, the average frame rate was 92fps, with a 1% low one at 64fps.
These numbers are great across all resolutions and may not be at full maximum graphics, but the game looks great, but the ability to run FC 26 in 4K on the RTX 4070 will cost you some extra grass and crowd quality, especially if you have little major focus during gameplay.
EA Sports FC 26 Graphics Preset
There are four graphics presets to choose from in the EA Sports FC 26.
The main difference between low and ultra presets is difficult to identify during gameplay, even when using zoom-in camera settings.
The most notable quality difference between the two is visible in the lighting when the night game is playing.
Ultimately, games usually play at a far-off camera angle, so lowering some graphics settings is not very compromised, as long as they perform well from the gaming PC. For us, the above settings provided the best balance between performance and visuals.
EA Sports FC 26 Accessibility Settings
A change from the previous year will welcome the accessibility menu when you first boot the Boot EA Sports FC 26. It only provides subtitle and color branding settings, but the Full Accessibility menu is available as usual from the main menu.
The Full Accessibility menu includes additional settings such as remapping controllers, simplifying in-game actions, the ability to enlarge some UI elements, and a high contrast mode.
How to test EA Sports FC 26
uses a dedicated gaming rig to test the best settings for performance and gameplay with the latest release. The test rig used to play EA Sports FC 26 includes the following components: IntelCoreI7-11700F, Nvidia Geforce RTX 4070, 32GB DDR4 3,200MHz RAM, and MSI B560 motherboard. Also test using Windows 11 64bit.
First run the test at 1,920 x 1,080 to identify the best setting for this entry-level resolution, then again at 2,560 x 1,440 to measure performance differences using the same setup. Finally, we’ll also test it out on 4K. CapFramex is used to capture frame data and compare test sessions.
Do EA Sports FC 26 need an SSD?
The EA Sports FC 26 does not require an SSD as specified in the system requirements. With 70GB shy, the download file isn’t that big, but if you’re working on only a single drive, you’ll need to make sure you have enough space.
If you are still using an old school mechanical drive and need an upgrade, or need extra storage space, you can find current SSD recommendations in the best gaming SSD guide.
How to monitor EA Sports FC 26 performance
If you want to focus on the performance of your EA Sports FC 26, whether you’re using an NVIDIA card or an AMD graphics card, there’s a simple way to do it.
For NVIDIA cards, install the NVIDIA app and make sure you have enabled in-game overlays, then press ALT + R to view the performance monitor in-game. With an AMD card, you can enable performance monitoring via the Radeon overlay using the shortcut Ctrl+Shift+O.
Alternatively, you can download free software like CapFramex or Nvidia Frameview to get a cleaner, more simplified benchmarking tool that works with any graphics card.
With a handheld gaming PC, there is a dedicated button for accessing a quick menu that can be accessed by performance monitoring, known as real-time monitoring.
It explains how FC 26 and how it runs on your system with Community Discord Server. This server allows you to chat with team members and fellow leaders.
