If you’re hunting Best Dying Light The Beast Settingswe have you covered. The original game in 2015 has expected improvements to visual quality, and subtle visual settings tweaks to remove guesses from this task and play faster with the best balance of image quality and frame rate.
The dying Light the Beast system requirements cover everything from the 10-year-old Nvidia Geforce GTX graphics card, up to the RTX 5070 listed for 4K Ultra Performance. Whether you have one of the best graphics card picks from the buying guide or not, great performance in dying light should not be too difficult, even with steam decks being verified. If you want to read our full thoughts on this horror adventure, you can read our passionate dying light review.
Optimally illuminates the BEAST settings on your PC
- vsync: Above
- Dynamic resolution scaling: Off
- Frame Rate Limiter: Off
- Upscalar type:DLSS
- Upscaling mode: Quality
- Frame generationOFF (for testing, but if prioritized, you can improve performance)
- Field of view:70
- Shine: Off
- Light stripes: Above
- Lens flare: Above
- chromatic aberration: Above
- Film grain effect: Off
- Motion blur strength:75
- Rendering fashion:D3D12
- Asynchronous calculation: Above
- Texture quality: expensive
- Draws the distance multiplier:140
- Motion blur quality: expensive
- Particle quality: expensive
- Shadow quality: expensive
- Shadows of screen space: Above
- Surrounding occlusion quality: expensive
- Glocal illumination quality: expensive
- Reflection quality: expensive
- Flashlight quality: expensive
- Fog quality: expensive
- Post Process Quality: expensive
I achieved an average frame rate of 115fps with a 1% lower of 91fps at 1,920 x 1,080 using the RTX 4070 test rig (full specifications below, in the test section). Moving to 2,560 x 1,440, the average dropped to 101fps, a 1% lower at 77fps. As for 4K, this returned an average frame rate of 52FP of 1% low of 45fps.
Generally speaking, Dying Light the Beast runs very well on the RTX 4070. You can expect a struggle when you reach 4K, but the performance at 1080p and 1440p is very strong and can be even stronger if you want to enable frame generation. When frame generation was enabled, the average frame rate at 1080p rose to 199fps and increased to 188FPS at 1440p.
Ideally, in a single-player game, you want to reach 60fps, an average frame rate of 45fps, at 1% lower. We are making these targets clear enough in the dying light. The gameplay is very smooth and there are no notable performance issues, even when you are engaged in combat with large enemy mobs.
The only settings that we recommend turning off are the glow and film grain effects. Glow created a nasty moment when bright lights are on the screen. This happens very often in the early stages of the game, and the game looks much cleaner even without a film grain filter.
The game currently does not have built-in benchmarks, so once you enter the open world, you run the same section of the game through tests, right after the opening section of the game.
The best graphics presets for the dying
The dying beast has four total graphics presets.
The main graphics menu doesn’t change much beyond the upscalar you are using, whether you use frame generation or some resolution and frame rate settings. However, when you go to the Advanced menu, there are plenty of individual graphics settings that you can adjust accordingly. There are simple on/off options, but some mimic graphics presets on very low to high scales.
Surprisingly, there is no significant difference in the quality of very low graphics presets and high graphics presets, at least when it comes to what can be easily displayed on still images. The biggest obvious difference is the quality of the shadows, and while the one on the right side of the image above (right-click on a new tab for original sizing and open) looks harsh and blocky, the one on the left looks softer and more realistic. The overall lighting and texture quality is also a little clearer, but there is much more noticeable difference in the number of effects and quality when it comes to combat or fast-paced running or platform sections.
Dying Beast Accessibility Settings
When you first launch the dying beast, you will be presented with the following accessibility settings: exercise drunken reduction, subtitles, color brand mode, QTE hold, and mono audio output.
Thankfully, there are more settings that can be accessed from the main menu, such as subtitle color and size. There are also input settings that can be adjusted from the Game submenu in Settings.
These are easy to adjust and can be run not only from the main menu, but also during the game. Additionally, each setting has detailed explanations and examples of what will be changed in-game, so there is no need to deal with trial and error.
How to test the dying light test on the beast
uses a dedicated gaming rig to test the best settings for performance and gameplay with the latest release. The test rig used to reproduce light at the dying time includes the following components: IntelCoreI7-11700F, Nvidia GeForce RTX 4070 12GB, 32GB DDR4 3,200MHz RAM, and MSI B560 motherboard. Also test using Windows 11 64bit.
First run the test at 1,920 x 1,080 to identify the best setting for this entry-level resolution, then again at 2,560 x 1,440 to measure performance differences using the same setup. Finally, we’ll also test it out on 4K. CapFramex is used to capture frame data and compare test sessions.
Do I need an SSD to illuminate the beast and die?
Die Light requires an SSD, as specified in the system requirements. With 70GB shy, the download file isn’t that big, but if you’re working on only a single drive, you’ll need to make sure you have enough space.
If you are still using an old school mechanical drive and need an upgrade, or need extra storage space, you can find current SSD recommendations in the best gaming SSD guide.
How to monitor your performance in the dying light
If you want to look at the performance of Dying Light The Beast, whether you’re using an NVIDIA or AMD graphics card, there’s a simple way to do it.
For NVIDIA cards, install the NVIDIA app and make sure you have enabled in-game overlays, then press ALT + R to view the performance monitor in-game. With an AMD card, you can enable performance monitoring via the Radeon overlay using the shortcut Ctrl+Shift+O.
Alternatively, you can download free software like CapFramex or Nvidia Frameview to get a cleaner, more simplified benchmarking tool that works with any graphics card.
With a handheld gaming PC, there is a dedicated button for accessing a quick menu that can be accessed by performance monitoring, known as real-time monitoring.
If you want to grab your own dying light prize, check out our dying light The Best Docket Code Guide.
You can follow us on Google News’ Daily PC Games News, Reviews and Guides. There is also a lively community of Discord Server. You can chat with team members and fellow readers about this story.
